|
*** Cisco Switch Power Modules ***
01) Model: WS-CAC-6000W
02) sale
03) Used
6000-WATT AC Power Supply for the Cisco Catalyst 6500 Series Chassis
PRODUCT OVERVIEW
The 6000-watt (W) power supply for the Cisco® Catalyst® 6500 Series chassis (Figure 1) is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.)
All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.
FEATURES AND BENEFITS
The 6000W power supply offers the following features:
• Universal input (100-240 VAC, 50-60 Hz).
• Compatible with full output in Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 switches. Works in Catalyst 6506 and Catalyst 6509 with a maximum output of 4000W.
• Redundant and hot swappable.
PRODUCT SPECIFICATIONS
Table 1-3 list product specifications for the 6000W power supply.
Table 1. Power Specifications
Description
Specification
Input-voltage range and frequency 100-240 VAC, 47-63 Hz
Input current (each input) 16A
Input-frequency range, output power 6000W if both inputs are 220 VAC
2900W if both inputs are active but at least 1 is at 110 VAC or a single input is active and at 220 VAC
Output holdup time 20 ms minimum
Power-supply input receptacles IEC 320-C19
Power cord rating 16A
Table 2. Product Specifications
Product Specifications
Chassis Compatibility
Cisco Catalyst 6506, Catalyst 6506-E, Catalyst 6509, Catalyst 6509-E, Catalyst 6509-NEB, Catalyst 6509-NEB-A, Catalyst 6513, Cisco OSR-7609, 7609, and 7613 chassis
Fan Tray Required
High-speed fan
Software Compatibility
Cisco IOS® Software Release:
• 12.2(18)SXD and later
• 12.1E: not supported
Cisco Catalyst OS:
• 8.4(1)
Physical Specifications
(H x W x D): 7 x 8 x 13.5 (in.)
Weight: 29 lb (13 kg)
BTU
~ 24,000 BTUs per hour (at 6 kW)
~ 11,600 BTUs per hour (at 2.9 kW)
Environmental Conditions
Operating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: -40 to 158 °F (-40C to 70°C)
Relative humidity operating, non condensing: 10% to 95%
Relative humidity nonoperating, noncondensing: 10% to 95%
MTBF: calculated 150,000 hr (MIL-217 and Bellcore TR-NWT-000332), demonstrated 300,000 hr
EMI and EMC Compliance
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 55024
EN300 386
EN 50082-1
EN 61000-3-2
EN 61000-3-3
EN 61000-6-1
Safety Compliance
UL 60950
CAN/CSA-C22.2 NO. 60950
EN 60950
IEC 60950
LED Indicators
2 green "INPUT OK," illuminate when input voltage is 85 VAC or greater
1 green "FAN OK," illuminates when the power supply fan is operating
1 red "OUTPUT FAIL," normally is off but illuminates when power supply outputs are out of regulation limits
Table 3. 6000W AC Power Supply Cable Specifications
Locale
Part Number
Cord Length
Plug Type Wall Appliance
Wall Plug Rating
North America (nonlocking) 200-240 VAC operation CAB-AC-2500W-US1 14 ft (4.3 m) NEMA 6-20 250 VAC, 16A
North America (locking) 200-240 VAC operation CAB-AC-C6K-TWLK 14 ft (4.3 m) NEMA L6-20 250 VAC, 16A
North America 100-120 VAC operation* CAB-7513AC 14 ft (4.3 m) NEMA 5-20 125 VAC, 20A
Continental Europe CAB-AC-2500W-EU 14 ft (4.3 m) CEE 7/7 250 VAC, 16A
Japan CAB-7513AC
CAB-AC-2500W-US
CAB-AC-C6K-TWLK 14 ft (4.3 m) NEMA 5-20**
NEMA 6-203
NEMA L6-20*** 125 VAC, 20A
250 VAC, 16A
250 VAC, 16A
International CAB-AC-2500W-INT 14 ft (4.3 m) IEC 309 250 VAC, 16A
*** 참고 자료 ***
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801c5c84.html
|
